BEF 250 Floor Planer and Scabbler 415 v – Hire, one week rate
£350.00
BEF 250 10″ 27 mm 415v, 3 phase floor planer or scabbler for –
• medium coating removal
• thermoplastic line removal
• screed removal
• keying surfaces
We charge an additional drum wear charge of £60 per month on hire.
Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.
If you can bring back this concrete floor scabbler early, then we can offer the following price reduction:
- 1 day hire: 40% reduction.
- 2 days hire: 20% reduction.
Terms and Conditions of Hire
Trade discounts available to approved trade account holders.
- Description
- Additional information
- Downloads
Description
BEF 250 surface preparation machine or concrete floor scabbler. Drum width 250 mm or 10 inches floor planer and scabbler for taking concrete down, removing floor coatings, keying surfaces and much more. Good for medium to large size areas. Comes with TCT cutters. The 250 scabbler has a handle to set cutting depth and easy to use controls. It has a 50 mm dust outlet for connecting directly to a vacuum dust control outlet.
We charge an additional drum wear charge of £60 per month on hire.
BEF 275 Floor Scabbler Instruction Manual
How to use a Concrete Floor Scabbler (YouTube)
FAQs
Q – what power is required to run this floor scabbler? A – 3-phase, 415-v, 32 amps (white box with a red socket).
Q – Which is the most suitable vacuum dust control unit for this machine. A – The CFM 3 motor vacuum. However, there are more routes for dust to escape than with a floor grinder, due to the nature and design of the machine. Multi-Hire do all that is humanly possible to mitigate dust escape, but it will be far from 100%. Therefore operatives must wear a good quality dust mask.
Q – How much will this floor scabbler take off concrete? A – That depends upon the make up and hardness of the concrete, but generally between 1 – 2 mm per pass.
Discounts available to approved trade account holders.
About Multi-Hire
Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, floor grinders, screed & resin mixers, floor lifters, shot blasters and floor scabblers. We have it covered. Machines for preparation of floors for tiling, concrete polishing, concrete floor scabbler, screed or epoxy painting. Our machines make the job much easier and improve the outcome.
Unsure what flooring equipment is right for you? Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need. Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop.
Additional information
| Weight | 160 kg |
|---|
