Description

This 3 phase diamond floor saw has a maximum cutting depth of 320 mm. The depth is fully adjustable and the machine has a guide to ensure straight lines.

The 800 mm blade will cut through concrete, asphalt and stone. It is powered by a 7.5 kW / 400 Volt motor. The saw blade speed runs at 1250 revs per min.

Dust is suppressed by a water tank.

The dimensions (L/W/H) are 1200/650/1090 mm and the weight is 156 kg.

Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.

FAQs –

Q – What is the maximum depth that this saw cut to? A – 320 mm (12.5 inches)

Q – Will it cut 320 mm in a single pass? A – No, it will only cut approximately 65 mm (2.5 inches) per pass, dependant upon the hardness of the surface. Several passes may be needed to go deeper than that.

Q – Does this saw attach to a dust control unit? A – No. Dust is supressed by water. Remember to keep the reservoir topped up at all times.

Q – What power is required? A – 3-phase, 32 amps, 415-volt socket.

Q – What is the maximum number of leads ? A – three, they are 20 metres each.

About Multi-Hire

Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, concrete grinders, screed & resin mixers, floor stripper, shot blasters and floor scabblers. We have it covered.  Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting and concrete breaking. Our machines make the job much easier and improve the outcome.

Unsure what flooring equipment is right for you?  Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need.  Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop.