Description

Floor preparation machine. Diesel 320 mm Floor Planer and Scabbler. This is the largest in the range boasting a working width of 320 mm. Good for planing concrete and coatings down up to 2 mm at a time, and deeper with several passes in a cris-cross pattern. The BEF 320 is self-propelled with a forward and reverse lever making the machine nice and easy to use, even in tight situations. The machine has a 50 mm dust outlet to connect directly to a dust control unit.

BEF 320 Floor Scabbler Instruction Manual

FAQs

Q – How do you start the diesel BEF 320? A – It is a pull chord machine. There’s knack to starting it. Do not yank the chord, rather pull the chord slowly at first, quickly increasing momentum.

Q –  Which is the most suitable vacuum dust control unit for this machine. A – The CFM 3 motor vacuum. However, there are more routes for dust to escape than with a floor grinder, due to the nature and design of the machine. Multi-Hire do all that is humanly possible to mitigate dust escape, but it will be far from 100%. Therefore operatives must wear a good quality dust mask.

Q – How much will this floor scabbler take off concrete? A – That depends upon the make up and hardness of the concrete, but generally between 1 – 2 mm per pass.

About Multi-Hire

Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, floor grinders, screed & resin mixers, floor lifters, shot blasters, concrete edge grinders and floor scabblers. We have it covered.  Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting. Our machines make the job much easier and improve the outcome.

Unsure what flooring equipment is right for you?  Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need.  Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop