Description

Small 110 v single head lightweight concrete grinder / adhesive remover. Perfect for thin coatings, adhesive, screeds and prepping small areas of concrete. Small enough to fit in most cars, it can be the perfect little grinder if transport is a problem. Easy to use machine, it also comes with an 50 mm outlet to be able to attach dust control. The lightweight concrete grinder can be fitted with 6 screw on diamond shoes for grinding or PCD shoes for substance removal.

Diamonds and PCDs can be supplied on a wear charge basis.

Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.

If you can bring back this hire item early, then we can offer the following price reduction:

• 1 day hire: 40% reduction.
• 2 days hire: 20% reduction.

Still unsure have a look at our blog on floor grinders or

View the manufacturer’s website for more details https://airtec.com/produkt/floor-grinder-bs-270-el/

FAQs – 

Q – What power source is required to run this floor grinder? A – 110-v, 32 amps, or can be run from a standard 230-v 13 amp socket with a 5 Kva transformer. It is a suitable alternative to larger 110-v floor grinders that cause the power supply to trip out or blow a fuse.

Q – Which tool holders do I need? A – This machine comes with a plate with either 30 grit grinding shoes or PCDs screwed onto it.

Q – Will this floor grinder leave me with a beautifully smooth. A – No, being a single head grinder, it has a tendency to leave light swirl marks. By keeping the machine constantly moving these can be reduced but will be noticeable if you propose to leave the concrete surface untreated or apply a lacquer or thin epoxy paint system. In which case, a light going over with a planetary grinder will easily remove swirl marks.

Q – Which is the most suitable vacuum dust control unit for this floor grinder. A –  We recommend the 110-v 3 motor dust control unit with either the bin system or Longopac system.

About Multi-Hire

Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, 110v single head concrete grinder, screed & resin mixers, floor lifters, shot blasters and floor scabblers. We have it covered.  Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting and concrete breaking. Our machines make the job much easier and improve the outcome.

Unsure what flooring equipment is right for you?  Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need.  Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop.

For more information on whether or not and which grinder is what you need have a look at our Blog on floor grinders.