Description

110v medium breaker, either the Kango 900 (Milwaukee) or the Hilti 905. The medium breaker is a powerful, lighter option to the heavy breaker. Using different accessories this machine can be used for a multitude of jobs. These include removing failed floor coatings, breaking out concrete, removing vinyl and ceramic tiles.

The medium breaker has a 1600W motor producing up to 20J of impact energy. We supply bits with this machine, point, chisel and bolster and charge a single sharpening charge of £2.00 per bit taken. Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.

If you can bring back this hire item early, then we can offer the following price reduction:

• 1 day hire: 40% reduction.
• 2 days hire: 20% reduction.

Medium Breaker Instruction Manual

FAQs –

Q – What is the maximum depth that this breaker will go down to? A- Approximately 10 cms / 4 inches. This is a rough guide and dependant upon the make up and condition of the concrete.

Q – What PPE should I wear when using the heavy breaker? A- Ear defenders, dust mask, safety specs and work boots PPE . Please adhere to vibration limits .

Q – any hints and tips? A – Use the machine to dig vertically and do not attempt to lift broken concrete, otherwise you risk snapping the tool. Don’t push too hard, allow the machine to do the work.

Q – Does this machine come with bits / tooling? A- Yes, but they are charged for separately on a monthly basis, rather than weekly.

Q – I only have 230-volt power available. Which transformer and leads are required? A – 3 Kva 16-amp transformer and 16 amp 110-v leads (maximum number, 3).

Additional information