BEF 200 Floor Scabbler 110 volt or Petrol
£170.00
FR 200, BEF 200, Airtec 200, Vonarx, 110v or petrol floor scabbler for –
• thin coating removal
• thermoplastic line removal
• screed removal or
• keying a surface.
We charge a minimum one-off drum wear charge of £50 per month out on hire.
Terms and Conditions of Hire
- Description
- Additional information
- Downloads
Description
Petrol or 110v small Floor scabbler with 200 mm or 8″ drum for removing thin coatings, screeds and thermoplastic lines. The floor scabbler can also be used for keying concrete and floor coverings. The cutting depth can be controlled to within 1 mm. This machine has a 50 mm outlet to attach directly onto a vacuum dust control unit.
Available in 110 volt and petrol versions.
Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.
If you can bring back this hire item early, then we can offer the following price reduction:
- 1 day hire: 40% reduction.
- 2 days hire: 20% reduction.
We charge an additional drum wear charge of £50 per month while on hire.
BEF 200 Floor Scabbler 110v Instruction Manual
Small Floor Scabbler Videos
110 v BEF200 floor planer scabbler
BEF 200 Floor Scabbler
FAQs
Q – what power is required to run this floor scabbler? A – 110-v, 32 amps or 230-v with a 5 Kva 32 amp transformer.
Q – Which is the most suitable vacuum dust control unit for this machine. A – The CFM 3 motor vacuum. However, there are more routes for dust to escape than with a floor grinder, due to the nature and design of the machine. Multi-Hire do all that is humanly possible to mitigate dust escape, but it will be far from 100%. Therefore operatives must wear a good quality dust mask.
About Multi-Hire
Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, floor grinders, screed & resin mixers, floor lifters, shot blasters, concrete edge grinders and floor scabblers. We have it covered. Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting. Our machines make the job much easier and improve the outcome.
Unsure what flooring equipment is right for you? Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need. Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop
Additional information
| Weight | N/A |
|---|
